Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

LOOK Aerostem Carbon
$799.99
- Direct Drive integrated stem - Carbon HM ultra rigid composition - 20g lighter than the C-Stem and more aerodynamic - New handlebar clamp - No visible screws - Better drag coefficient - Angle adjustment: - 17° to + 13°
Zipp SL Speed Stem
$419.99
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately
Zipp SL Speed Stem
$379.99
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
3T Arx LTD
$354.99
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.
Renthal Apex 35
$200.00 - $219.99
- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
Renthal Apex Stem
$219.99
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Renthal Integra 35
$219.99
- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width
Profile Design Aeria Stem
$217.99
Every Profile Design product is perfectly optimized to minimize aerodynamic drag. So, it's no surprise that Profile's Aeria Stem has hidden bolts and a low profile faceplate to smooth oncoming air. The sculpted shape is constructed from strong, lightweight forged aluminum, and the 17-degree drop ensures an aerodynamic fit on your time trial or triathlon bike.
Zipp Service Course SL-OS Stem
$209.99
Zipp's Service Course SL OS Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Wide range of sizes and angles. - Service Course SL OS stem made for 1-1/4" steerer tube bikes. Ships with shims for 1-1/8" steerer tubes - Zipp Quickview integrated computer mount available separately - Lifetime warranty
Profile Design Aeria Ultimate Stem V2
$200.00
The Aeria Ultimate stem has been designed to complement our Aeria Ultimate Bar. It offers hidden cable routing. The low rise options allow a rider to get into a low, aerodynamic position especially useful if you need to compensate for a modern, high stack frame. The stem shape is designed to match perfectly with the Aeria Ultimate bar, it will also fit any other 31.8mm basebar. Fit Data - Stem Length: 70mm,100mm - Stem Stack: 12.2mm - Weight: 70mm (364g) - 100mm (436g) Accessories - The HSF Aeria hydration system is designed to fit to this stem and convert any bike into a ‘Superbike’ - Material: Forged 6061-T6 aluminum - Clamp Diameter: 31.8mm - Steerer Tube Diameter: 1-1/8in (1in with included shim) - Stack Height: 32.5mm - Finish: Matte Black with Gloss Accents - 70mm not capable of storing Di2 Junction Box or EPS Interface
Deity Components Intake
$159.99
- CNC Machined from hard high grade 7075 T73 Aluminum - 0 deg rise to keep you low and in control - 69mm wide clamping platform for an incredibly stiff front end - Intended Use: Downhill
Deity Components Copperhead Stem
$139.99 - $144.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering a strong steerer-mounted stem. Deity's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - Material: Aluminum - Length: 35mm or 50mm - Stem Angle (deg): 0 deg - Weight: 135g. (35mm); 161g. (50mm)
TruVativ Descendant Direct Mount Stem
$119.99 - $141.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design
Deity Components Intake 31.8mm DM
$139.99
Deity's INTAKE Direct Mount DH Stem takes machining and flow to another level! Yet another premium race good designed to make your kit look amazing and perform even better, the INTAKE DM stem is available in a 31.8mm bore and, like its counterpart the INTAKE 35mm DM Stem, it utilizes a 3-piece design for ease of installation and a super-stiff set-up. This DEITY design is the culmination of form and function and hits the sweet spot for your cockpit! - DIRT MAG Top 100 Product for 2018 - 50mm reach - Zero degree rise to keep you low and in control - CNC Machined from a solid block of aluminum - Boxxer Standard platform - 7075 T73 Aluminum - Available in high polished black ano finish - 31.8mm bore clamp for the perfect complement to our new BLACKLABEL 800 Handlebar - 69mm wide clamping platform for an incredibly stiff front end - Covered by our Lifetime Crash Replacement Policy to the original owner - 146 grams
Deity Components Micro DM
$139.99
This tiny package packs a big punch with a minimal design. The MICRO DIRECT MOUNT DH Stem is strong enough to carry the DEITY name while touting one of the lightest designs in the world. There isn't any wasted space on this moto-inspired 4-piece design, but don't let that fool you. Its 65mm super-wide clamping platform delivers incredible stiffness and transfer of power from you to the front wheel. At a compact length of just 30mm, this Boxxer standard 31.8mm stem is the perfect fit for the longer top tube designs of today's DH bikes while offering the flexibility of a flip-flop graphic option for your choice of stealth or flash. There is no shortage of machining detail or design in this mini stem and, as with all DEITY designs, we take extra care to deliver only the best! - CNC machined from hard high-grade 7075 T73 aluminum - Compact 30mm length for the current crop of long downhill frames - Compatible with 31.8mm oversized handlebars - Boxxer standard platform - Moto-inspired 4 piece design - Super-wide 65mm clamping platform for torsional stiffness - Flip flop graphics kit - Hidden front crown bolts - 10mm rise - One of the lightest Direct Mount Stems in the world - High polished finish with chamfer detailing throughout for stunning detail - Weight: 110 grams
3T Apto Stealth
$134.99
A stem may not seem like the most exciting bike part, but it's in our DNA to care about it in great detail. After all, no other part has such a dramatic effect on your riding position and thus your speed, comfort, and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design comes together in a moving sculpture. Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, particularly in combination with our new drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. - Material: Alloy 6061 - Steerer diameter: 28.6mm (1 1/8") - Handlebar diameter: 31.8mm - Key size: 4mm Allen key - Steerer bolt torque: 5Nm - Faceplate bolt torque: 5Nm
Deity Components Cavity Stem
$129.99
The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail. - Machined from 6061 T6 aluminum - Wide 55mm faceplate for increased stiffness with wide handlebars - Rounded edges at all sides, corners, and angles - Reverse cross bolt system for increased clamping power - Flip flop design for increased range of height adjustment - Pro Installation Tip: Always run the steerer tube all of the way through the stem with a small spacer on top - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - Stem Angle (deg): 0 deg - S.H.I.S. Stem Clamp Diameter: 28.6 - Stack Height: 33 - Weight: 150 g
Race Face Turbine R 35 Stem
$125.00
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Spank Split 35 Stem
$119.99
- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized
Spank Split Stem
$118.99 - $119.99
- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized
TruVativ Atmos 7k Stem
$118.00 - $119.99
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel
Spank Director Direct Mount Stem
$114.99
Spank's Director Direct Mount Stem fuels your need for gravity riding, with rock solid mounting, stiff forged aluminum construction, and the control-enhancing combo of a low rise and short extension. • Forged, CNC-machined aluminum • Boxxer/Fox40/Manitou compatible • Lockdown hardware included • Brushed anodized finish
Cinema BMX Martinez Stem
$104.99
The Martinez stem is inspired by classic-looking top-load stems with key improvements in strength and geometry. A 48mm reach gives a responsive feel while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized Allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Beveled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved. - Reach: 48mm - Rise: 22mm (8mm Inverted) - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid Oversized w/6mm Allen Hex - Weight: 10.9 oz
TruVativ Descendant Stem
$100.99
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Spank Direct 40 Stem
$98.99
Dial your fit with this Direct Mount alloy stem with adjustable reach and height to achieve the ideal stance and balance point - Chamfered bar-clamp zones to reduce stress risers and improve fatigue life of handlebars - CNC weight optimized for 31.8 bars - 2D forged, shot peened and anodized for high strength and low weight - A Snap Fit top cap and laser logos for a refined finish - Recommended for: ASTM 5, All mountain, DH, free ride - LENGTH (mm): 25-30 (adjustable) - RISE: 28-33 (adjustable) - DIAMETER (mm): 31.8 - STACK HEIGHT (mm): n/a - WEIGHT ± (g): 130 - TECHNOLOGIES: Adjustable length/rise, chamfered bar clamp - MATERIAL: 2D forged MGR alloy, CNC weight optimized
Spank Spike 25/30 Direct Mount Stem
$98.99
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
TruVativ Descendant 35mm Stem
$95.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Easton EA70 Stem
$79.00 - $92.30
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
Zipp Service Course Stem
$80.00 - $89.99
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Profile Design Aris Road Stem (+/-25-degree rise)
$81.99
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Page 1 of 2 Next page