Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Indoor Cycling

Tacx FLUX 2 Smart
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
Tacx NEO 2 Smart
Meet The NEO 2 Smart, the pinnacle of indoor bike training. In addition to immersive features that truly make you feel like you’re riding outdoors, this new direct drive also features pedal stroke analysis and a number of other refinements that make it one of the most quiet, realistic and accurate bike trainers available. - Next-to-silent smart bike trainer with improved accuracy within 1%; measures power and cadence - Enables accurate pedal stroke analysis with left and right balance and power distribution - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride feel - Unique motor design allows for a maximum sprint resistance of 2,200 watts and simulates climbs up to a 25% incline - Only bike trainer with road feel, a feature that lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Mains power optional Power indicator: Multicolor LED , Spot on floor Connection indicator: (ANT/BT) 2 LEDs Firmware upgradable: Yes Suitable cassettes: >2018: Shimano & SRAM: 8 - 11 speed; <2018: Various Shimano, SRAM & Campagnolo cassettes. >2018 Campagnolo body sold separately. Suitable axles: Road 130mm, MTB 135mm. Adapters for other widths available Supplied with: Front wheel support, Quick release for road bikes and QR-fork mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) Height: 550 mm (21.7 in) Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2800 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
Wahoo KICKR Axis Feet
Whether mashing or spinning, riding in the saddle or out, KICKR’s AXIS feet let cyclists of all types customize the ride feel, enhance feedback and offer a more realistic training experience to match their unique riding style. - Active feedback - A tuned ride  - Reduce fatigue, go longer  - KICKR AXIS feet create a realistic ride feel providing up to 5 degrees of side-to-side movement.
Tacx Roller Drive Belt
$15.99
Replacement roller belt for Tacs roller trainers.
Wahoo Aerobar Mount
$21.99
Wahoo's Aerobar Mount adds the ability to securely mount your Wahoo Bike Case (sold separately) to your aero bars. It works with any of Wahoo's line of bike cases.
Kinetic Threaded Shallow Cone Cup
$24.99
This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Only compatible with the Rock and Roll trainer - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)
Exustar ARC 1 Look Delta Cleats - PELOTON Compatible
$25.00
EPS Compatible with Look Delta pedals, Peloton, and Exustar pedal series. Features: Anti-slip walk pads Specs: Color Red Cleat Bolt Pattern 3-Bolt Float (deg) 9 Cleat Compatibility Look Delta/Peloton
Kinetic Internal Chain Actuated Cone Cup
$26.99
The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.
Saris Leveling Block
$30.00
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Blackburn TrakBlock 3
$34.99
- Stable front wheel stand - Slots for 700c, 650c and 26-inch wheels - Use with Trakstand Mag 3 to level bike - Use with other trainers to raise handelbars
Saris Sweat Guard
$35.00
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
Saris BLE USB Adapter for PC
$39.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Saris Mag+ Shifter
$39.99
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
CycleOps Climbing Riser Block
$40.00
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
Saris Climbing Riser Block
$40.00
For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)
Tacx E-Thru Trainer Axle
$49.99 - $65.00
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Saris ANT+ USB Adapter for PC
$53.99
Connect your PC to CycleOps VirtualTraining.
Blackburn Folding Trainer Mat
$59.99
No Sweat, No Scratches. When you train hard, you sweat. Good for your body, but not good for your floors. This mat keeps the sweat off your floors and also protects them from being scratched by your trainer, wheel block or cycling shoes. - Reduced Noisy Floor Rumble - Protects Your Floors
Saris Trainer Tire
$60.00
Save Your Tires for Race Day Frequent trainer riders often find the tread on their rear wheel will wear down over time. We recommend using our trainer tires on our Saris indoor trainers. They are made of tough material that can stand up to hours and hours and hours of training. Product Features - 700c x 23 – 25 fits most road bikes. - Ultra-quiet and super-durable. - For use with an indoor trainer only.
Wahoo ANT+ USB with Extension Cord
$60.00
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Wahoo RPM Speed Sensor (BT/ANT+)
$60.00
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Blackburn Trainer & Trailer Adapter Kit
$69.99
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging, or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch
Wahoo RPM Cadence Sensor (BT/ANT+)
$75.00
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Saris 148x12 Trainer Thru Axle Adapter
$80.00
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Tacx Direct Drive Quick Release with Adapter Set
$90.00
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Wahoo Protector
$91.99
Wahoo's Protector is a rugged bike case that protects your iPhone and provides easy access to phone, music, and favorite cycling apps while you ride. Wahoo's Bike Cases protect and transform your iPhone into a powerful cycling computer: • Protects your iPhone: IPX5 waterproof certification and rugged shock resistant construction • Mounts your iPhone to handlebars or stem while you ride • Compatible with Wahoo Extended Battery and Wahoo Aerobar Mount (sold separately, not compatible with PROTKT) • Works with all types of bikes - road, mountain, e-bikes, and hybrid • Fully accessible and functional touch screen • Low-energy and does not require charging • Weight: Bike Cases: 128 grams, S/C Sensor: 30 grams
Stages Cycling SB20 Stages Saddle
$92.99
Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm. - Traditional CrMo rail design - Seat Mast not included
Minoura ANT+ Minoura Heart Rate Monitor With Belt
$99.99
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller. - Pickup and transmit your heart rate data with a comfortable fit - Low energy ANT + (2.4GHz) wireless protocol - Minoura is an official ANT + Alliance member - Universal on every ANT + device - Net Weight: 67 grams (including battery) - Battery: 1 x CR2032
Robert Axle Project Trainer Thru Axle
$100.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Wahoo KICKR Trainer Floormat
$103.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.
Page 1 of 3 Next page