Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

CO2 Inflators

Vittoria Pit Stop Tire Sealant
$16.99 - $20.00
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak Tri-BackUp Elite
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Topeak Tri-BackUp Elite 90
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
Topeak CO2-Bra CO2 Inflator
$50.00
Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.
Topeak AirBooster Race Pod CO2 Inflation System
$57.99
Topeak's AirBooster Race Pod is a compact and completely self-contained tire inflation kit featuring an AirBooster CO2 inflator, two tire levers, two 16g CO2 cartridges, and a mounting module with strap and neoprene bag. The unique mounting module straps to the seatpost, seat tube, and provides lightning fast access to the AirBooster inflator, extra CO2 cartridge, and tire levers. The Airbooster Race Pod is the perfect CO2 tire repair solution for racing or endurance events.
Topeak Airbooster G2 CO2 Inflator
$57.99
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak TubiBooster
$89.99
2 in 1 design! This unique product works like a mini air compressor that allows any floor pump to compress air into the 1000cc aluminum air tank. Then, it quickly releases a high volume of air to mount tubeless tire beads. The aluminum TubiBooster head also works as a CO2 inflator, compatible with Topeak threaded 16g/25g CO2 cartridges. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves, Push to inflate - Air Tank: One liter, Store up to 200psi / 14bar air pressure (varies with the pump capacity) - Working Pressure - 1800psi / 124bar - Compatible with Topeak threaded 16g / 25g CO2 cartridges - Material: Aluminum
Profile Design CO2 Inflator
Use pressure to your advantage with Profile Design's CO2 Inflator. Screw on a CO2 cartridge (sold separately), and this chuck is ready to air your tires up to pressure quickly and easily whether you're out on the race course or in the garage prepping for a ride. It's push-activated so you can use only as much CO2 as needed for the inflation task at hand. It's also small enough to fit almost anywhere so you'll always have it along. Best of all, no arm-numbing pumping is required!
Profile Design CO2 Mounting Bracket
$21.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Pro Micro C02 Inflator
$40.00
- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible
MSW Windstream Twist Inflator Kit
$30.00
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged. - Compact, lightweight design fits in tight spaces - Press-on for both Presta and Schrader valves - Compatible with 3/8” threaded cartridges - Rotate CO2 cartridge to regulate inflation - Kit includes CNC-machined aluminum inflator head with a green finish for better visibility
Lezyne Twin Speed Drive CO2
$25.99 - $29.99
Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.
Lezyne Trigger Speed Drive CO2
$29.99
Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.
Lezyne Control Drive CO2
$34.99
Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)
Lezyne Caddy Sack CO2
$39.99
Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.
Lezyne 25g CO2 Cartridges (5-pack)
$44.99
A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.
Lezyne Alloy Drive CO2
$44.99
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible and works with 16g threaded cartridges.
Lezyne Control Drive CO2 25g
$54.99
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge
Lezyne Twin Kit
$54.99
Lezyne's convenient Twin Kit includes their Twin Speed Drive CO2 inflator, two CO2 cartridges, a couple tire levers and a Velcro strap to keep it all together. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.
Lezyne Flow Storage Adapter Without CO2 Cartridges
$69.99
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, and two Matrix levers. It will also hold two CO2 cartridges (sold separately). - Weight: 95g /311g Loaded
Lezyne Pressure Drive CFH
$74.99 - $75.99
Lezyne's Pressure Drive CFH features a versatile design combining the efficiency of a hand pump with the convenience of CO2. Innovative 2-in-1 inflation system works as a high pressure hand pump or CO2 inflator. Integrated steel-braided CO2 Flex Hose (CFH) doubles as a CO2 dispenser. Pump features a CNC machined aluminum body, piston and handle. Flip-Thread Chuck works on both Presta and Schrader valves. Kit includes: Pump with integrated CFH hose, one 16g cartridge and CFH mounting hardware. Adaptable configuration conveniently mounts to frame or slides into jersey pocket. Compatible with threaded CO2 only.
Lezyne Flow Storage Adapter
$79.99
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, two CO2 cartridges and two Matrix levers. Not available with CO2 cartridges in all countries. Weight: 95g /311g Loaded
Genuine Innovations 16-Gram Threaded CO2 Cartridges (6-pack)
$28.49
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Genuine Innovations HammerHead
$33.99
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Genuine Innovations Ultraflate
$35.99
Comfortable, durable and most of all reliable, the Ultraflate is Genuine Innovations' most tried and true cupped inflator. Its reinforced glass nylon construction and brass internals means it can take the strain of everyday use and still maintain precision inflation performance. - Trigger-controlled technology for fast, easy and controllable CO2 inflation - Built-in "trigger lock" to prevent accidental discharge - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes (1) Ultraflate inflator head (1) non-threaded 20 gram CO2 cartridge
Genuine Innovations AirChuck Elite CO2 Tire Inflator
$39.99
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
Genuine Innovations CO2 Refill Cartridges (20-pack)
$69.99 - $116.99
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
Fabric Trigger CO2 Tool
$30.00
Get back on the bike in no time with this handy CO2 inflator that lets you quickly and precisely fix a flat. The flip-lock valve attachment creates a secure fit, so you can quickly inflate the tire without losing precious CO2. The integrated regulator design means refilling the tube is no longer a guessing game, allowing for a controlled and intuitive fill. - Fits Presta or Schrader valve - Supplied with 2 x 16g CO2 - Efficient controlled release - Intuitive trigger action
Crank Brothers Klic HP Gauge + CO2
Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes! Features also include a concealed CO2 inflator, air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HP (high pressure) version recommended for tires 45c and narrower - All Klic pumps come with a bottle cage bracket mount - Length: 260mm - Pressure: 120psi / 8.3bar - Weight: 170g - Warranty: 5 years
Crank Brothers CO2 Sterling (6-pack)
$22.00
The Crank Brothers CO2 Sterling 16g threaded cartridges are compatible with Crank Brothers' Sterling CO2 Inflator. Includes: six threaded 16g cartridges
Page 1 of 2 Next page