Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bottles/Cages

Kinetic Twenty20 Bottle Cage
$19.99
The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.
Blackburn Wayside Side Entry Mtb Cage
$25.00
Modern mountain bikes' fancy suspension and lower standover height have put water bottle cage real estate at a premium, but Blackburn's Wayside Side Entry MTB Cage buys back some space! - Left or Right Handed - This 2 piece system can be installed so that the bottle is able to exit from either the right or left side. No extra hardware is required and the cage installs easily and quickly. - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Standard 65mm center-to-center hole spacing - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 87mm/3.43in - Height 87mm/3.43 - Weight 45 Grams
Topeak Ninja Cage
$12.99
Ninjas adapt and conquer, and the Ninja Cage is no exception. Knowing that smaller frames and tighter spaces may not allow the use of Ninja Cage mounted add-ons, Topeak includes extra rubber pads and zip ties so you can use it in combination with the top water bottle boss to mount Ninja Cage and your weapon of choice. Choose from any of the Ninja T series tool cases, Ninja CO2 inflator or Ninja Pouch spare tube carriers for the ultimate combination. - Material: Engineering grade plastic - Cage Outer Diameter: Fits standard water bottle - Added Feature: Rubber pads and zip ties - Size: 14.8 x 8.2 x 7.8 cm / 5.8” x 3.2” x 3.1” - Weight: 44 grams
Profile Design Aero HC Bottle
$75.00
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
Serfas Vendetta Carbon Bottle Cage
$59.99
• Super Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 19 Grams +/-
Tacx Ciro
$29.99
Made with a mix of materials - a carbon shell and glass fiber core - the Ciro bottle cage is optimized to be as light as possible. It's shaped to clamp the bottle very tightly, and has been given a minimalistic design so it does not upstage your bicycle.
Evo Castaic Bottle Cage
$14.99
- Strong lightweight design
Serfas Switch-Hitter Nylon Cage
$17.99
The unique design of Serfas’ Switch-Hitter Nylon Cage makes it adjustable for center, right or left side bottle retrieval. On any bike frame where bottle clearance is an issue, this lightweight nylon cage shines.
Serfas Starfighter Nylon Cage
$17.99
Made of a lightweight nylon composite, Serfas’ Starfighter Nylon Cage works with road and mountain bikes to hold your bottle in place and allow for easy removal.
Blackburn Clutch Carbon Side-Entry Cage
$75.00
The Blackburn Clutch Cage proves that side entry bottle cages don't need to be hard to use. This high-end cage is designed to accommodate smaller and/or full suspension frames where standard cages do not fit. Slotted bolt holes allow for finely tuned adjustments, so it's easy to pull your bottle out no matter the shape or size of you favorite steed. The Clutch Cage is available in left or right entry and comes in four colors. - Designed for off road use - Left side bottle entry specific design - 30mm of vertical mounting adjustment - Made of rugged UD carbon fiber - 22 grams - Available in 4 colors
Profile Design FC25 Drink System
$159.99
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Profile Design RM-L Double Bottle Cage System
$77.50
Profile Design's RM-L system provides a sleek and aerodynamic way to address your on-the-bike hydration needs. The strong metal bracket attaches quickly and easily to your saddle rails. It has spots for up to three bottle cages of your choice. It even includes two lightweight Profile Design Kages to get you started. Placing your bottles behind the saddle creates a cleaner aerodynamic profile for your bike, resulting in time and energy savings over the course of your next Tri.
Profile Design FC35 Drink System
$179.99
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
Profile Design Stryke Kage
$10.50 - $12.99
Profile's Stryke Kage ensures you’ll never lose your bottle again. Constructed of injection-molded nylon/fiberglass, this incredibly strong cage provides a great grip and doesn’t leave marks on bottles. Plus, this cage is super light, too.
Profile Design Razor 2 Bottle System
$63.99
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
Profile Design Aerodrink System
$41.99
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Profile Design Axis Karbon Kage
$112.99
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
Tacx Deva
$20.00
The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.
Tacx Shanti
$13.99 - $15.99
The Shanti bottle has an innovative, easy-to-clean membrane cap that prevents fluid from leaking when you hold it upside down and enables you to drink the exact desired amount. Twist the cap to lock it and prevent any fluid from leaking out, which is ideal when it is in your bag. In the 'open' position, the bottle is always ready to use, simply squeeze to drink. - Dishwasher safe - Manufactured in the Netherlands
Serfas Ligero Carbon Bottle Cage
$64.99
• Ultra Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 14 Grams +/-
Lezyne Road Drive Cage Carbon
$85.99
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
Topeak QR Cagemount
$9.99
An innovative low profile quick release system that fits between the bottle cages and bike frame that allows each cage to be removed without the need to unscrew the bolts. This lets extra small bike frames to be carried by a rear mounted car racks (by allowing more room between the frame tubes when cages are removed) and prevents cage damage by rear type bike carriers. The perfect solution for preventing damaged bottle cages for all bike frame sizes.
Blackburn Camber UD Carbon Cage
$72.99 - $75.00
This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - “Rib cage” retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams
Profile Design Aeria Hydration
$186.99
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
Profile Design RM1 Bottle Cages
$88.00 - $110.00
Profile's RM1 Bottle Cages hold 2 bottles behind the seat where they are tucked out of the wind for superior aerodynamics and easy access, too. There are CO2 pump cartridge mounts as well. The RM1 clamps tightly to standard 7mm-diameter seat rails with the included hardware.
Profile Design Insulated Water Bottle
$18.99
Profile's Insulated Water Bottle keeps your beverages cool while keeping you hydrated. It features a wide top for adding ice and drink mix, and is super easy to squeeze.
Profile Design Aqua Cell
$46.99
With Profile's Aqua Cell, your favorite drinks are just a straw sip away! This durable, injection-molded system features two chambers so you can optimize your hydration with multiple drinks. The main chamber holds 35 ounces and the secondary chamber holds 15 ounces. And, the top caps open easily for on-the-go refills. The Aqua Cell also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Profile Design Side Axis Kage
$21.99
The ideal cage for tight frame designs and BTA mounts. The cage body can be flipped for either right side or left side removal. - Easy load design for compact frames - Side-loader design makes this cage ideal for small frames that leave little room for removing bottles in the typical forward and up motion. Suitable for both road and mountain use. - BTA Mount Optimized: The cage is optimized for BTA (between the arms) bottle mounts where the natural motion is to pull the bottle sideways. Specs - Construction: Injected Nylon/Glass Fiber - Weight: 52g
Profile Design Razor 2 Bottle
$46.00
Profile Design's Razor 2 Bottle is a 14-ounce, aerodynamic bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine for additional free speed. It fits nicely on road bikes, too, for improved aerodynamics as well. The Razor 2 Bottle Cage is sold separately.
Profile Design Icon SS Water Bottle
Icon SS Water Bottle The Icon SS water bottle features a self-sealing cap for precise fluid flow and to prevent leakage. The body is improved with a softer BPA Free, Food Safe material allowing for better grip and fluid flow control. - Material: BPA Free, FoodSafe LDPE - Capacity: 21oz (621ml)