$178.00 - $269.99
Profile's all-carbon RMC can mount up to 2 water bottle cages (sold separately) behind the seat where they are tucked out of the wind for superior aerodynamics as well as easy accessibility. The lightweight RMC features a storage area and accessory mounting straps so you can carry all of your repair essentials. The RMC clamps tightly to standard 7mm saddle rails.
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
This rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. - 14" adjustment for case to glide under saddles with a transition tab - Precision machined stamped 6061-T6 construction - Capacity to hold one (included) or two Profile Design Vise Kages - Weight: 200g
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
$88.00 - $110.00
Profile's RM1 Bottle Cages hold 2 bottles behind the seat where they are tucked out of the wind for superior aerodynamics and easy access, too. There are CO2 pump cartridge mounts as well. The RM1 clamps tightly to standard 7mm-diameter seat rails with the included hardware.
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
It's the perfect finishing touch for your super-light carbon bicycle: Look's Carbon Bottle Cage. It's made of carbon and weighs a scant 24 grams. This beautiful cage holds bottles securely over even the bumpiest roads with the help of rubber grippers on the inside.
$79.99 - $95.00
Blackburn's Carbon Cinch Cage embodies an elegant and sleek design that has a firm grip to keep your bottles cinched down. - UD Carbon Fiber - Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 78mm/3.07in - Height 78mm/3.07in - Weight-16g/0.04lbs
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
Profile Design's RM-L system provides a sleek and aerodynamic way to address your on-the-bike hydration needs. The strong metal bracket attaches quickly and easily to your saddle rails. It has spots for up to three bottle cages of your choice. It even includes two lightweight Profile Design Kages to get you started. Placing your bottles behind the saddle creates a cleaner aerodynamic profile for your bike, resulting in time and energy savings over the course of your next Tri.
$72.99 - $75.00
This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - “Rib cage” retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams
The Blackburn Clutch Cage proves that side entry bottle cages don't need to be hard to use. This high-end cage is designed to accommodate smaller and/or full suspension frames where standard cages do not fit. Slotted bolt holes allow for finely tuned adjustments, so it's easy to pull your bottle out no matter the shape or size of you favorite steed. The Clutch Cage is available in left or right entry and comes in four colors. - Designed for off road use - Left side bottle entry specific design - 30mm of vertical mounting adjustment - Made of rugged UD carbon fiber - 22 grams - Available in 4 colors
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
$55.00 - $75.00
Profile's Aquarack holds 2 water bottles behind the seat where they are tucked out of the wind for superior aerodynamics, and are also easily accessed. Plus, there are CO2 cartridge mounts as well. The Aquarack clamps tightly to seatposts from 27.2mm to 31.6mm in diameter.
Topeak's super light and stiff aerospace-grade carbon cage is the high-zoot accessory for your dream bike. In fact, at 20 grams it's one of the lightest cages out there! It holds securely and won't scratch, corrode or stain your bottles.
A new take on a classic style. The Ultra Handheld features a 17-oz Quick Stow flask that molds to the shape of your hand. The 3D ventilated mesh material is comfortable and breathable over the long haul, and the integrated phone pocket has a zippered closure for added security. The elastic X-Grip strap system ensures a stable carry, and there's even reflectivity and an extra stretch pocket for additional gels or trash. - 17oz Quick Stow flask is lightweight, collapsible and features our classic one-piece silicone bite valve for rapid hydration - 3D Ventilated mesh offers multi-directional air flow and cushioning to maximize comfort and breathability - Elastic X-Grip strap system lets you customize your hold and keeps the flask secure even when your grip is relaxed. - Secure Phone Pocket: Conveniently located with a zipper closure for secured quick access - Reflectivity: For early morning or late-night runs - Small stretch essentials pocket for extra fuel
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
• Ultra Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 14 Grams +/-
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
Perfect for short-distance running and fast-paced walking the new Flash Belt features a secure phone pocket, reflective accents and a best-in-class insulated 17oz Peak Fitness Chill bottle. The bottle sleeve includes an elastic strip to ensure the bottle stays secure. No longer do you have to sacrifice performance and storage when a waist pack is all you need. - Breathable Air Mesh: Stay cool and comfortable - Adjustable Waist Buckle: For an optimized, secure fit - Secure Zippered Pocket: Keep your phone and other essentials safely stowed - Reflectivity: For added visibility - BPA/BPS/BPF free - Gear Capacity: 0.5L/30 cu in - Pack Weight: 150g/5 oz - Dimensions: 13 x 60 x 8 cm / 5.1 x 23.6 x 3.1 in - Fits Waist/Hips: 26-46 in / 66-116 cm - Included Accessories: 17 oz. Peak Fitness Chill Bottle - Number of External Pockets: 1
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
• Super Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 19 Grams +/-
Flip, bite, and sip even more with the redesigned Eddy + bottle! Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels. Double-wall vacuum insulation keeps drinks cold. Strong and durable stainless steel with powder coat finish, easy to clean. - 25% More Flow Per Sip: Flip open the bite valve and sip - Leak-proof when closed, spill-proof when open - Double-wall vacuum insulated to maintain temperature - Stays Dry: Sweat-proof insulation - Easy carry handle - Easy to Clean: Cap dishwasher safe Hand wash stainless steel vessel - Universal Cap: Compatible with Chute Mag and Hot Cap vessels - Drink Clean: BPA, BPS, and BPF free
Give lukewarm the cold-shoulder with the new Hot Cap bottle. A leak-proof 360° cap allows drinking from any side so you can sip subconsciously. Sweat-proof, vacuum insulation keeps the outside of the bottle dry and your beverage hot for up to 6 hours or cold for up to 24 hours. Hot Cap can accommodate contents up to 195°F, 90°C. For easy cleaning, the rotating valve twists apart and can be removed completely. - 360° Cap: Allows drinking from any side of the bottle - Leak-Proof Rotating Valve: Twists open for easy sipping and twists apart for easy cleaning - Vacuum Insulation: Keeps beverages cold for 24 hours and hot for 6 hours - Stays Dry: Sweat-proof insulation ensures a no-slip grip - Dishwasher Safe Cap: Cap assembly is top-rack dishwasher safe (hand wash vessel)
Page 1 of 5 Next page