Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Fenders

Topeak DeFender iGlow X
$99.99
Stay clean and stay seen with Topeak's DeFender iGlow X. They're a unique pair of fenders with integrated 0.5W super bright red LEDs for safety at night or during low visibility conditions. The lightweight polycarbonate is tough and flexible, and the stainless steel strut attachment system is easy to install and provides adjustability for excellent tire coverage. Plus, you'll get up to 100 hours of run time on each fender's 2 coin batteries (included).
Axiom Rainrunner 360 FR - MTB26
$80.00
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. Weight 610 g / 1.34 lbs (pair) Construction - Alloy/Engineering plastic FRAME-RUNNER mounts - 360 degree visibility 3M Reflex sides - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting system - Below: Mount on frame or fork via included Frame-Runners - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets - FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties - 3M Reflex side panels offer 360 degrees of reflective visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Extended mudflaps keep feet dry and reduce rear spray - Sold pre-assembled for quick mounting - Compatible with most disc-brake-equipped bikes
Blackburn Splashboard Fender Combo
$50.00
Blackburn's Splashboard is a great fender set to keep handy when the weatherman throws around those words "chance of." Up front, rubber mounting straps secure the fender to your down tube and rubberized pads protect your frame finish. Out back, adjusting the fender angle fine tunes protection and easy tool-free installation on nearly any seatpost gives you instant defense against mud and water.
Topeak DeFender XC1
$50.00
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Axiom Roadrunner AR - MTB26
$45.00
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 652 g / 1.44 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
Axiom Roadrunner AR - Road
$45.00
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Note: The Roadrunner AR - Road fender fits 700c wheels up to a width of 28mm Weight: 548 g / 1.21 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays - Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
Axiom Roadrunner AR - Trekk
$45.00
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
Topeak DeFender XC11
$40.00
Topeak's DeFender XC11 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Tacx MTB Mudguard
$36.99
Go ride outside! Whether you ride over cobblestones or in the woods, the mudguard keeps you splashing rain and mud. Its smart design makes it simple and easy to connect to your bike. - The shape offers optimal protection against splashing water and mud while made as light as possible - Thanks to the quick-release attachment, you can effortlessly click the mudguard into place under the saddle - Made from durable shockproof plastic - Attractive, slender design - Easy to clean - Compatible with 7mm or 9mm saddle rails
Axiom Disc-Runner (Pair)
$34.99
A simple yet effective alloy adapter that facilitates the mounting of traditional fenders to bicycles equipped with disc brakes. CONSTRUCTION • Lightweight aluminum MOUNTING SYSTEM • Mount to eyelets ADDED BENEFIT • A quick, easy and relatively inexpensive solution to make fenders fit • Sold as a pair
Tacx Race Mudguard
$31.99
Go ride outside! Whether you ride over cobblestones or in the woods, the Tacx mudguard protects your back from dirt and water. It's made of strong yet lightweight material and can easily be attached and removed with a quick release system. - The shape offers optimal protection against splashing water and mud while being as light as possible - Thanks to the quick-release attachment, you can effortlessly click the mudguard into place under the saddle - Made from shockproof plastic that does not break, even on bumpy cobbled roads or dirt tracks - Attractive, slender design that's easy to clean
Blackburn Splashboard Rear Fender
$28.99
The Splashboard is a great fender to keep handy when the weatherman throws around those words "chance of." Adjusting the angle fine tunes protection and easy tool-free installation on nearly any seatpost gives you instant defense against mud and water.
Evo Adjustable Rear MTB Fender
$27.99
Evo's Adjustable Rear MTB Fender is compatible with 24- and 26-inch wheels. Easy to install on your seatpost, it keeps you from getting sprayed with mud on sloppy trails. We like it for when we commute on mountain bikes, too.
Blackburn Barrier XL Mudguard
$26.99
Fat Bike Mud Guard Fat bikes are inherently meant for extreme conditions, where water, mud and grit are no strangers. It mounts easily with reusable hook-and-loop straps, so you can attach it to nearly any mountain bike fork without any worries. - Built From Number 5 Recyclable Polypropylene - 1.2mm Thickness
Topeak DeFender M1 (26-inch)
$26.99
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Axiom Axle Runner (Set Of 4)
$25.00
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets. CONSTRUCTION • Lightweight red anodized aluminum MOUNTING SYSTEM • Mount to quick release skewer ADDED BENEFIT • A quick and easy solution to make fenders fit • Set of four
Axiom RearRunner Fat Clip-on Fender
$25.00
Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces
Axiom Rearrunner Rear Fender
$25.00
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic.
Topeak DeFender RC11 Fender
$25.00
Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC11 fender. It uses unique quick-release mounting system that makes installation a snap and it's made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. There are pivot points that make it compatible with nearly any size bike or tire. The underside is highly polished so grime doesn't stick and, it accommodates tires up to 700 x 25c in size.
RockShox RockShox MTB Fender
$21.00 - $21.99
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
Axiom FrontRunner Fat Downtube Fender
$20.00
Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces
Blackburn Barrier Seat Fender
$20.00
This simple, creatively designed rear fender clicks into most saddle rails to help keep your backside dry when the conditions take a turn for the sloppy. Small enough to store it flat in your hydration pack so you've always got it with you. Attaches in seconds with a fold and a tug. - Built from number 5 recycleable polypropylene - 1.2mm thickness - Tool free installation
Eclypse Spray-Shield Fender
$16.99 - $18.99
- Technopolymer construction - Durable and weatherproof material - Fits most forks - Zip ties included
Topeak D-Flash FS Fender
$17.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
Topeak D-Flash ST Fender
$17.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
49°N Faceshield Front MTB Fender
$15.99
Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0". - Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face! - Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer. - Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard. - Includes 4 reusable zip ties - Weight: 27g
Axiom Rackrunner Fender
$15.00
Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms
Topeak D-Flash DT Fender
$14.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
Topeak D-Flash S Fender
$11.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
Topeak MTX DeFender
$9.99
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
Page 1 of 2 Next page